Alta Technologies header image
Alta-Flex DG

941 Series | Alta-Flex™ DG

Day Glow Expandable Monofilament Sleeving

  • Demonstrates excellent chemical and fungus resistance
  • Provides good mechanical properties with additional coverage
  • Resistance to abrasion and cut-through make it ideal for many industrial and electrical applications.
  • Excellent chemical resistance permits its use in harsh fluid environments
  • Open weave construction allows expansion above or below original diameter
  • Easy to apply and slip on quickly over irregular shapes
  • Good flexibility at low temperatures allowing easy flexing in any direction
  • Can neatly capture a number of different sized items within one length
  • Most commonly used over wires, wire bundles and harnesses, cable assemblies, flat ribbon cable, tubing and hoses where it provides a tough, durable protection
  • Open weave construction allows for complete drainage, prevents condensation and provides for dissipation of heat and moisture
  • Ideal for application in machine tools, automatic equipment and robotics where wires and tubes are often required to flex freely during operating cycles
  • Suitable for exposure to all weather conditions.
Size
(Nominal I.D.)
Size Range
(Inches)
Approx. Weight
(LBS/1000 ft.)
Standard Spool put-up
1/8"3/32"—1/4"1.91000 ft.
1/4"1/8"—3/8"2.81000 ft.
1/4" 3–ends1/8"—3/8"3.91000 ft.
3/8"1/4"—5/8"6.0500 ft.
1/2"3/8"—3/4"7.5500 ft.
3/4"1/2"—1-1/4"12.5250 ft.
1"5/8"—1-1/2"14.0250 ft.
1-1/4"7/8"—1-3/4"15.9250 ft.
1-1/2"1"—2"19.6250 ft.
1-3/4"1-1/4"—2-3/426.4250 ft.

The information provided above represents average values and is believed to be reliable. Alta Technologies, Inc. makes no warranties as to its accuracy and disclaims any liability in connection with its use. It is provided for general use only and should not be incorporated into any specific specifications.

Property Test Method Performance
Tensile StrengthASTM D-876100,000 psi
ElongationASTM D-87620%
Specific GravityASTM D-8761.31
Moisture Absorption (24 Hours)ASTM D-5700.08%
Shrinkage @ 180°C 4%
Max. Operating TemperatureUL 224125° C
Melt TemperatureASTM D-2117250° C
Low Temperature FlexibilityMIL I 23053-E-70° C
Flexural Modulus (10³ psi @ 73° F)ASTM D-790400
Fungus ResistanceMIL STD 810 (508)No Growth
Copper CorrosivityMIL I 23053No Effect

Testing verifies that there is virtually no effect on the tensile strength and only a slight reduction in elongation (approx. 5%) of ALTA-FLEX DG when exposed to the following fluids: Cleaning Fluid, De-icing Fluid, Fuel Oil, Gasoline, Hydraulic Fluid, Lubricating Oil, Salt Water and Solvents.

Web Site Design and Development by Radiant Webscapes