Alta Technologies header image
Flex-Guard PE/HD

952 Series | Flex-Guard PE/HD

Heavy duty braided PET monofilament sleeving

  • Demonstrates excellent chemical and fungus resistance
  • Provides good mechanical properties with additional coverage
  • Resistance to abrasion and cut-through make it ideal for many industrial and electrical applications
  • Excellent chemical resistance permits its use in harsh fluid environments
  • Open weave construction allows expansion above or below original diameter
  • Easy to apply and slip on quickly over irregular shapes
  • Good flexibility retained at low temperatures allows for easy flexing in any direction
  • Can neatly capture a number of different sized items within one length
  • Most commonly used over wires, wire bundles and harnesses, cable assemblies, flat ribbon cable, tubing and hoses where it provides tough, durable protection
  • Open weave construction allows for complete drainage, prevents condensation and provides for dissipation of heat and moisture
  • Ideal for application in machine tools, automatic equipment and robotics where wires and tubes are often required to flex freely during operating cycle
  • Suitable for exposure to all weather conditions.
(Nominal I.D.)
Size Range
Approx. Weight
(LBS/1000 ft.)
Standard Spool put-up
3/8"3/16"—3/4"8.3500 ft.
5/8"5/16"—1"11.4250 ft.
1"1/2"—1-1/2"17.4250 ft.
1-1/2"1"—2"28.2250 ft.
2"1-1/2"—3"34.8100 ft.
3"2-1/2"—4-1/2"43.5100 ft.
4"3"—5-1/4"44.0100 ft.

The information provided above represents average values and is believed to be reliable. Alta Technologies, Inc. makes no warranties as to its accuracy and disclaims any liability in connection with its use. It is provided for general use only and should not be incorporated into any specific specifications.

Property Test Method Performance
Tensile Strength ASTM D-876 90,000 psi
Elongation ASTM D-876 25%
Specific Gravity ASTM D-876 1.31
Moisture Absorption (24 Hours) ASTM D-570 0.08%
Shrinkage @ 180°C   4%
Max. Operating Temperature UL 224 125° C
Melt Temperature ASTM D-2117 250° C
Low Temperature Flexibility MIL I 23053-E -70° C
Flexural Modulus (10³ psi @ 73° F) ASTM D-790 400
Fungus Resistance MIL STD 810 (508) No Growth
Copper Corrosivity MIL I 23053 No Effect

Testing verifies that there is virtually no effect on the tensile strength and only a slight reduction in elongation (approx. 5%) of FLEX-GUARD PE/HD when exposed to the following fluids: Cleaning Fluid, De-icing Fluid, Fuel Oil, Gasoline, Hydraulic Fluid, Lubricating Oil, Salt Water and Solvents.

Web Site Design and Development by Radiant Webscapes